Silane ZINCA-792 may be used as an additive, eliminating the need for special primers in numerous bonding applications. Specific systems that demonstrate improved adhesion

Details

N (2-aminoethyl)-3-aminopropyltrimethoxy-silane ZINCA 792

Molecular Formula: NH2(CH2)2 NH(CH2)3Si(OCH3)3

Molecular structure:

CAS NO. : 1760-24-3

ZINCA 792 finds use as an :
Adhesion promoter in polysulfide, polyvinyl chloride plastisol, silicone tow-part urethanes and epoxy adhesives and sealants
Additive in phenolic and epoxy molding compounds
Additive to latex coatings, adhesives and sealants
Adhesion promoter in one-part silylated urethane adhesives andsealants based on organofuntional silane.

Features and Benefits:

Typical Physical Propertie:

Applications:

Silane ZINCA 792 may be used as an additive, eliminating the need for special primers in numerous bonding applications. Specific systems that demonstrate improved adhesion when silane ZINCA 792 is used are:

RTV Silicones and Hybrid Silane-Crosslinked Sealants

Silane ZINCA 792 addition to one- and two-part silicone-crosslinked sealants improves adhesion to a variety of substrates, including glass, steel, aluminum and concrete. This silane can dramatically enhance adhesion to a wide array of plastics when used in combination Technology for silylating urethane polymers. (For formulation and silylated prepolymer preparation information, please refer to Literature bulletin #112-026-30, “Silquest Organofunctional Silanes – Crosslinkers and Adhesion promoters for Urethane Adhesives and Sealants.”

Polysufide Sealants

When added to one- and two-part polysulfide sealants, Silane ZINCA 792 provides better adhesion to a variety of substrates, including glass, aluminum and steel. Silane ZINCA 792 is typically used at a loading of 0.5 to 1.0 percent by weight to the sealant. It disperses well and produces cohesive failure in the sealant rather than adhesive failure of the bond between the sealant and the substrate.

Furthermore, the use of silane ZINCA 792 can eliminate the need for primers normally required to achieve adhesion to surfaces.

Plastisol Sealants

Adding Silane ZINCA 792(0.5 to 1.5 weight percent) as a replacement for polyaminoamide adhesion promoters in plastisol sealants improves bonding to metal substrates.

In addition to increased strength, the silane-modified plastisol sealant has better overall appearance than a system that uses polyaminoamide adhesion promoters. Silane ZINCA 792 modified plastisol systems have a very light color, and the cured compound is bubble-free.

Additive in Phenolic and Epoxy Molding Compounds

Silane ZINCA 792, as an additive in phenolic and epoxy molding compounds, reduces the water absorption of molded composites. This, in turn, leads to improved wet electrical properties, particularly at low frequencies. High-temperature strength properties are also improved.

Validity period and storage:

Stored in cool and dry place, avoiding water, tinder, heat source and light, the validity period will be 6 months on such condition.

Package:

1. 25KGS/Plastic Drum

2. 200 KGS/Steel Drum

3. 1000KGS/IBC