The human silica gel with good softness is generally very good between 0-10 degrees, and the softness can even reach 0 degrees or below 0 degrees.

    Want to mask manufacturers, with 5 degrees 10 degrees 15 degrees more, relative to the doll manufacturers 0 degrees with more.Do skin product type, use 0 degree or 5 degree more.

    Usage: mix A and B components 1:1 by weight, then water after vacuum defoaming.Room temperature (25 degrees) 30 min operation time, 3 to 4 hours of complete curing;Under the premise of vacuum machine, heating 60-120 degrees can be considered, which can be completely cured in tens of minutes; 

    Note: liquid human silica gel should be sealed storage, mixed human silica gel is used up in the specified time, to avoid waste caused by glue curing; , avoid rubber and nitrogen (N), phosphorus (P), sulfur (S), tin (Sn), lead (Pb), mercury (Hg), alcohols, such as water contact, such as organic tin compound and silicone containing organic tin sulfur and sulfide, ammonia and sulfur rubber compounds and ammonia containing material, also can't contact changed the condensation type plastic containers or die, otherwise, Adding molding liquid silicone rubber will appear sticky surface, incomplete curing or even not curing phenomenon; · During operation, it should be separated from containers that have used condensation type silica gel, and the silica gel should be operated with unused room temperature silica gel tools to avoid non-curing or sticky surface phenomenon, incomplete curing signs or even non-curing phenomena, and at the same time, it should avoid contact with oil mud, all kinds of clay, atomic ash and solder.