The use method of defoaming agent is roughly divided into three kinds, flow addition, drop addition, spray method.

    Flow addition: flow addition uses a container with a valve, put in the circulating water treatment defoaming agent, when the circulating water treatment process foam, open the valve will be defoaming agent flow into the sewage tank, to eliminate the foam purpose.

    Drop addition: drop defoamer into the area where there is a lot of foam, so as to maximize the use of defoamer.

    Spray method: spray defoaming agent on the surface of defoaming agent with high-pressure equipment.

    Note: when using defoaming agent, use the dosage according to the manufacturer's instructions, adding too much will be wasted.Use immediately if you want to dilute it, or add a stabilizer if you want to dilute it for a long time.When diluting, do not dilute excessively, when the solid content reaches more than 5%.The defoaming effect of defoaming agent will be greatly reduced, and more defoaming agent is needed to achieve the defoaming effect.