Silicone mold manufacturing is a very complicated process, from the initial design, processing, assembling and debugging steps, to really put into use after Z, throughout the life cycle of every working procedure must consider the quality of the silicone mold, the impact of every detail to reach the designated position, so as to improve the quality of mould of Z eventually.How to improve the quality of silica gel mold in the manufacturing process?Here's ZINCA's guide:

  1、Choose the casting material, the quality of the material directly affects the quality of the silica gel mold, it is very important to choose the material with good performance and good heat resistance, so that the product is good.

  2. The design of silica gel molds should be scientific and reasonable. For technical researchers, in order to design things into products that meet the current market demand, they must be designed reasonably, use the standard mold structure, and complete the standard execution of the advantages and disadvantages of mold parts, the usability of mold structure and the processability of technology.

  2、Perfect quenching process, for the silica gel mold, quenching process is indispensable, the quenching steps should be correct operation, if one step of the wrong operation, will cause quality problems in the production of the mold, resulting in plastic mold can not be used or shorten the service life.

  3. Mold assembly: Silica gel mold assembly is like assembly machine. Every part and every screw can not go wrong, otherwise the consequences will be quite serious, leading to product defects and affecting production, or completely damaging the mold and causing scrap.So the assembly of the work must be very careful.In the assembly process, we should pay special attention to the cleaning work of the mold, especially the waterway and screw hole, and be sure to blow the iron filings inside.

  4, mold maintenance: mold maintenance is mainly in the production process of maintenance and maintenance.After each use of the mold, comprehensive maintenance should be carried out, especially the rust prevention of the forming part and the rust prevention of the main action parts.Because the mold is connected with water in the production process, it may sleep on the mold in the installation or disassembly process, so we must ensure that the mold is dry, and then brush a layer of oil protection.

  According to the above operation guidance, I believe that when you use mold silica gel to manufacture silica gel mold, the quality will certainly get a qualitative improvement. No matter how complex the silica gel mold is, it can be operated according to the above guidance specifications.If you want the quality of your silica gel mold to be improved, try it quickly.