Flame-retardant plywood is a commonly used wood for hand-made furniture. It can be used as a middle and low grade decorative panel, which needs to be covered with colored paint.Plywood, also known as fine core board, is cut veneer by wood segment or cut thin wood by wood planer, and then bonded with adhesive agent and become three or multi-layer plate material, usually with odd layer veneer, and make the fiber direction of adjacent layer veneer mutually vertical gluing and become.
Methods/steps
1, the first thing to look at is the plywood material, the price of different trees for materials is different, we can choose the right variety according to the decoration budget when decorating.Any kind of decoration materials in the current market oversupply, a lot of low price of willow eucalyptus core plywood a corner in the material markets, this kind of plywood is cypress wood core board made the surface coloring treatment, appearance and willow eucalyptus core board are basically identical, but the quality is vary widely, willow eucalyptus core board both in quality and density is higher than that of cypress wood from the core, Therefore, we must choose carefully when we choose and buy.
2, observe the surface of flame retardant plywood whether there are cracks, wormholes, bubbles, stains and other bad marks, some plywood is two different lines of veneer glued together, so when buying to see whether the plywood joint is tight, there is no uneven phenomenon.Furniture made with cracked plywood is not a good look.
3, because some plywood is glued and become, so we should observe whether its color can be consistent, consistent texture, and wood color and furniture paint color is coordinated, the plywood color to choose and buy and decorate the overall effect of coordination.
4, then check whether the work of plywood is fine.Because plywood is to have two veneer stick and become, inevitable meeting has positive and negative sides.The board face layer of plywood wants wood grain clear, frontal smooth and clean level off, adverse Z had better not have the feeling of rough thorn hand, Z had better not have node.If plywood degumming, not only affect the construction, but also cause pollution, so in the selection of available hand gently beat the plate, if a clear sound, it shows that the plate adhesive is better, if a thick sound, it shows that the plate degumming phenomenon.
It is mainly used for various structural bonding and sealing in industrial production, such as: structural bonding of steel plate in automobile compartment;CRT CRT, DY deflection coil and other high voltage parts of the insulation bonding and sealing;Fixing and bonding of PCB sensitive components, capacitors, transistors, etc.Refrigerator, microwave oven, circuit board, electronic components, solar energy field bonding seal;Moisture-proof and waterproof packaging of exquisite electronic accessories;Automobile headlight gasket seal;Power plant pipes with wear-resistant ceramic pieces, window frame installation glass bonding seal reinforcement;Elastic bonding of most metal and non-metal materials, especially suitable for the environment with special requirements on temperature;Electric power, electronics, electrical appliances, medical machinery, sensors, mechanical equipment, refrigeration equipment, shipbuilding industry, automobile industry, chemical industry, light industry, insulation bonding reinforcement and sealing protection of wire and cable, etc.
