Dimethylsilicone oil can not only be used in our daily chemical products, medicine, in industrial life application is also very wide.But when dimethylsilicone oil is used in machinery and equipment, if the content of water in silicone oil is too high, it can accelerate the deterioration of oil products, produce precipitate sludge, lead to the destruction of oil film and corrosion of metal parts, and then increase the friction between the friction pairs, cause the bearing overheating, cause the speed regulating system failure or cause equipment failure. 

    What are the reasons why the emulsification time exceeds the standard?And what can we do about it?The following Xiaobian will tell you about the reasons and solutions for the excessive emulsification time of dimethyl silicone oil.

    The shorter the emulsification time of dimethyl silicone oil, the shorter the water enters the lubricating oil system, and the oil and water can be separated quickly in the tank.Otherwise, it indicates that oil and water can not be effectively separated in the tank.When the steam accidentally enters the dimethylsilicone oil system, the dimethylsilicone oil with good emulsifying performance can make the oil in the tank static process to separate out most of the water, to reduce the burden of the filtration and water removal device, so that the water content in the hydraulic oil can be restored to normal in a short time.

    Dimethylsilicone oil emulsification time exceeds the standard does it mean that the oil quality has deteriorated and needs to change the oil or needs to take other remedial measures?We can take part in the replacement of new oil or add demulsifier method, can significantly shorten the demulsification time of dimethylsilicone oil, dimethylsilicone oil demulsification time in a long time to maintain within 60min, the unit runs smoothly.

    Therefore, even if the operation of dimethyl silicone oil emulsification time has exceeded 30min, as long as the water content in the hydraulic oil is low, the oil will not emulsify.If the other performance indicators of dimethylsilicone oil at this time are in the normal range, it shows that dimethylsilicone oil has not deteriorated. The anti-emulsification performance of hydraulic oil can be improved by adding demulsifier or adding new oil and extending its service life.