Printed silica gel is a kind of silica gel specially used for cloth and leather printing. This silica gel is highly transparent and environmentally friendly raw material approved by FDA. Now big brands in the clothing industry use printed silica gel for printing products or trademarks.Printed silica gel is composed of two components AB, the ratio: 10:1 for the operation of the hand table, A is liquid silica gel, transparent and viscous, B is curing agent transparent similar to water.And AB is 1:1 ratio, two components are colloidal, widely used in machine operation more.

    Printed silica gel printing products do not take off the layer, can be color matching, breaking through the silica gel printing color is single, monotonous, rarely used in the field of fashion bottleneck, to provide clothing industry with a very promising decorative materials.Silica gel printing screen printing after the pattern has a strong three-dimensional sense, and feel soft.Silk screen pattern has excellent peeling strength, wear resistance, brightness, water fastness.

    1. Printed silica gel is printed on the cloth through the screen board, and the display effect is three-dimensional and 3D effect, which needs to be repeatedly printed and is more obvious.Show the whole print pattern, lifelike.

    2, the overall printing silicone adhesive is very strong, washable, no fading color, no glue, and safe, environmental protection, no smell, has been large brand leisure clothing and sportswear as a printing trademark, pattern choice.

    3. At the same time, it is suitable for gloves with anti-slip heat insulation function, children's sole glue, anti-slip car cushion, concave and convex embossing, vamp printing, molded trademark, anti-slip ribbon processing and so on.

    The current ratio of printed silica gel is 10:1 or 1:1, but 10:1 is more commonly used, 10 are silica gel, 1 is curing agent!Silica gel printing glue is highly transparent and relatively thick glue. If you need to dilute silica gel printing, the commonly used dilution method is to add silicone oil. Although silicone oil is good at increasing fluidity, it will appropriately reduce hardness.

    If you don't care about hardness can choose with silicone oil diluted, but if you have any requirements on the hardness, you can choose to contact the factory to help you adjust and choose our new printing silicone, we can according to your requirements in terms of hardness of the deployment, still can free technical guidance, welcome your consultation.