Imitation human silica gel, even if xiaobian has a long time to study this aspect, but it is rarely seen, the reason is that: the performance requirements of imitation human silica gel is higher than the general mold silica gel or pad printing adhesive, it needs special adjustment, so the output is small;The main reason of Z is that customers have less demand, which is also the main factor that seldom appears in the view of xiaobian.

How about the performance of human silicone, and how about the service life?

Human silicone rubber manufacturers in the imitation of human silica gel belongs to a kind of silicone molding, is a low viscosity 1:1 series OF AB silica gel, the overall hardness is relatively low, generally in 0 degrees to 15 degrees, if the hardness is too high, it has been out of the category of imitation human silica gel.It is used for the production of human masks, headsets, human models and adult products. The mixed viscosity is about 1000-3000cps. The operation mode is manual operation, which is similar to the operation method of ordinary mold silica gel.

As for its service life, there can be divided into liquid life, and the service life after curing.

Imitation human silica gel by special process, can withstand high temperature, aging resistance, acid and alkali resistance.Uncured human like silica gel in the premise of two components without mixing, is never cured, always ensure the liquid state.Only with the passage of time, the water inside the liquid silica gel gradually evaporates, the remaining silica gel components will produce precipitation, and the overall viscosity of silica gel will thicken. At this time, only need to add silicon oil to go in and quickly stir evenly, it will become very thin, and you can operate again.Generally add molding liquid silica gel imitation human silica gel existence conditions need to be in the shade, avoid direct sunlight, generally Z long shelf life in 12 months or so.

The warranty period of the human body silicone in liquid form is one year, after curing?

In fact, after curing silica gel products in normal use, maintenance in place, can be placed for 5-10 years will not change anyway.Although it can withstand high temperature, but Z is afraid of using in high temperature.If the cured silicone imitation human body is baked at high temperature for a long time, the color will turn yellow, the hardness will become hard, the performance will become poor, the molecular structure of silica gel inside is destroyed, the performance will decrease, the use value may be very short.